Archive

Archive for the ‘IBTA Plugfest’ Category

Newest IBTA Compliance & Interoperability Testing Includes EDR 100Gb/s InfiniBand Methodology

February 25th, 2014

2014 has already proved to be a busy year for the IBTA. The organization is currently in the midst of compiling results from the recent Plugfest 24, which took place this past October at the University of New Hampshire’s Interoperability Laboratory.

IBTA SC13 Demonstration

IBTA SC13 Demonstration

While exhibiting at SC13 in November, we had the opportunity to showcase the IBTA’s newest EDR 100Gb/s compliance and interoperability testing capabilities that were implemented during October’s biannual Plugfest event. Due to the popularity of the demo at the conference, we wanted to share some details and results here on our blog.

The IBTA’s sophisticated test set-up leveraged Anritsu generators and Tektronix scopes to test EDR active cables.  The Anritsu generators were used to generate a spec compliant 25Gb/s input signal to one lane of an active optical cable along with 25Gb/s signals to the other 7 lanes which were being used as “aggressor” lanes.  Tektronix provided a scope capable of testing the 25Gb/s per lane output of the EDR active cables. The details are provided in the Anritsu Method of Implementation (MOI) which is available here:  http://infinibandta.org/content/pages.php?pg=technology_methods_of_implementation.

The significance of this testing, is that we were able to not only achieve 25Gb/s speed per lane (100Gb/s total over 4 lanes), but we were also able to analyze data at that speed. The IBTA currently has both copper and active optical cables running at 100Gb/s that are also compliant with the latest InfiniBand specifications.

3M Company, Advanced Photonics, Inc, Amphenol, FCI, Finisar, Foxconn, Fujikura Ltd., Hitachi Cable America, Lorom Industrial, Mellanox, Molex, Samtec, Sumitomo, TE Connectivity and Volex attended PlugFest 24 and tested a total of 189 cables for both compliance and interoperability.

Intel, Mellanox and NetApp also tested a total of 17 devices including InfiniBand to Ethernet Gateways, Host Channel Adapters (HCAs), Switches and SRP Targets. These end points and switches provided the foundation for running approximately 1000 interoperability tests using the Open MPI test benchmark and the interconnects provided by the cable vendors listed above.

Anritsu InfiniBand ATD EDR Test Solution

Anritsu InfiniBand ATD EDR Test Solution

Agilent, Anritsu, Tektronix and Wilder Technologies all provided the latest generation of Test equipment needed to test 100Gb/s InfiniBand EDR cables. The IBTA PlugFest provides a great opportunity for all these companies to work together to improve InfiniBand and to ensure that the products are both robust and interoperable.

IBTA’s Plugfest events take place twice per year, during which the IBTA tests compliance with the InfiniBand architecture specification and interoperability with other InfiniBand products. The IBTA Plugfest 24 Integrators’ List has been released and features vendor devices and cables that successfully passed all required Integrators’ List compliance tests and interoperability procedures during Plugfest 24.

The IBTA Integrators’ List contains a list of compliant and interoperable products and is available here: http://infinibandta.org/content/pages.php?pg=integrators_list_overview.

For more information on the upcoming IBTA Plugfest being held in April 2014 check out the Plugfest website.

IBTA Updates Integrators’ List Following PF23 Compliance & Interoperability Testing

September 25th, 2013

We’re proud to announce the availability of the IBTA April 2013 Combined Cable and Device Integrators’ List – a compilation of results from the IBTA Plugfest 23, during which we conducted the first-ever Enhanced Data Rate (EDR) 100Gb/s InfiniBand standard compliance testing.

IBTA’s updated Integrators’ List and our newest Plugfest testing is a testament to the IBTA’s commitment to advancing InfiniBand technology and ensuring its interoperability, as all cables and devices on the list successfully passed the required compliance tests and interoperability procedures. Vendors listed may now access the IBTA Integrators’ List promotional materials and a special marketing program for their products.

Plugfest 23 was a huge success, attracting top manufacturers and would not have been possible without donated testing equipment from the following vendors: Agilent Technologies, Anritsu, Molex, Tektronix and Wilder Technologies. We are thrilled with the level of participation and the caliber of technology manufacturers who came out and supported the IBTA.

The updated Integrators’ List is a tool used by the IBTA to assure vendors’ customers and end-users that manufacturers have made the mark of compliance and interoperability. It is also a method for furthering the InfiniBand specification. The integrator’s list is published every spring and fall following the bi-annual Plugfest and serves to assist IT professionals, including data center managers and CIOs, with their planned deployment of InfiniBand solutions.

We’ve already begun preparations for Plugfest 24, which will take place October 7-18, 2013 at the University of New Hampshire’s Interoperability Laboratory. For more information, or to register for Plugfest 24, please visit IBTA Plugfest website.

If you have any questions related to IBTA membership or Integrators’ List, please visit the IBTA website: http://www.infinibandta.org/, or email us: ibta_plugfest@soft-forge.com.

Rupert Dance, IBTA CIWG

Rupert Dance, IBTA CIWG